ACT ACTPRO-X Datasheet

ACTpro-X
Product Overview
The ACTpro-X reader is a multi-format reader that
supports both the new ACTProx range of cards
and fobs and existing HID-compatible tokens.
The ACTpro-X reader is available as Proximity
only (ACTpro-X 1030/1040), Pin and Proximity
(ACTpro-X 1050), for additional security and
Pin only (ACTpro-X 1060), where proximity
cards are not required.
Main Features
Multi-format reader
●
Choice of proximity only, pin
●
and proximity or pin only
ACTProx Cards and Fobs supported
●
HID-compatible tokens supported
●
Surface or flush mount (mounting directly
●
on to standard electrical back box)
Indoor or outdoor installation (IP67)
●
Built-in buzzer
●
Tri-Colour LED
●
Operates between -20C and +50C
●
+5V DC to +12V DC operation
●
Auto detect Clock and Data or 26-bit
●
Wiegand Output
Robust polycarbonate housing
●
Vandal Resistant Cover (ACTpro-X 1030VR)
●
available for the ACTpro-X 1030 proximity reader.
Installation / Specification Guidelines
May be installed in exposed
●
outdoor conditions (IP67)
May be a maximum of 30m from the
●
controller when powered from +5V DC
May be up to 100m when
●
powered from +12V DC
Use 8 core screened cable
●
Proximity and Keypad Readers
ACTpro-X 1040
ACTpro-X 1050
ACTpro-X 1050/1060
ACTpro 3000
Door 2
ACTpro-X Reader Schematic
ACTpro-X 1030
Door 1
ACTpro-X 1040
(Entry Reader)
Door 1
ACTpro-X 1030
(Exit Reader)