Table of Contents
Advertisement
6. How to assemble your AVENT ISIS™ Breast Pump
Separate all parts and ensure pump has been cleaned
and sterilised as in section 3:
1
Wash your hands thoroughly. Click the
white valve (g) into the pump body (f)
from underneath making sure the flat
side of the valve is downwards.
4
Place the silicone diaphragm and stem (d)
into the pump body (f). Make sure it fits
securely round the rim by pressing down
with your fingers to ensure a perfect seal.
(This is easier if assembled whilst wet.)
6
IMPORTANT: DO NOT LOSE THE
WHITE VALVE. YOUR PUMP WILL NOT
WORK WITHOUT IT OR IF IT IS FITTED
INCORRECTLY. If lost, spare valves are
available direct from AVENT.
5
Place the forked end of the handle (e)
under the silicone diaphragm and stem
(d) and push down gently on the
handle until it clicks into place.
2
Place the pump body (f) onto
the AVENT bottle (h).
6
6
Carefully insert the Let-down Massage
Cushion™ (b) into the pump funnel (f)
making sure it is perfectly sealed all
round the rim of the funnel.
(This is easier if assembled whilst wet.)
3
Twist gently clockwise until it catches.
DO NOT OVERTIGHTEN!
7
Click the pump cover (c) onto the pump
body (f). To make the pump completely
stable insert the bottle into the stand (i).
7
Advertisement
Table of Contents
