Ulead BD DISCRECORDER Manual page 9

DV mode
Note: The Sony HDV camcorder can be detected only under Windows XP Service Pack 2.
To capture video from an HDV camcorder:
1. Connect your HDV camcorder to your computer's IEEE-1394 port using the
IEEE-1394 cable.
2. Turn on your camcorder and switch it to Play mode.
3. If you have a Sony HDV camcorder, make sure it is switched to HDV mode.
4. Click Capture
5. Select the device to capture from Source.
6. Click Advanced Settings and select Capture Options. In the Device Control
dialog box, select HDV 1394 Device Control in Current Device drop-down
list. Click OK.
7. After defining your capture options, click Advanced Settings and select
Change Capture Plug-in. Choose Ulead HDV Capture Plug-in from the
Current Capture Plug-in list, and then click OK.
8. Use the navigation controls to preview your project or move around your
programs.
9. Click Capture Video
capturing.
.
to start capturing. Press [Esc] to stop
BD DiscRecorder USER GUIDE 9
HDV mode