Table of Contents
Advertisement
To capture video directly onto a disc:
Make sure your video source is switched on and properly connected to your
computer.
1. Insert a disc into the burner. Then click Straight to Disc and click Next.
2. Select the device to capture from Source.
3. Select a capture mode (for example, select fixed duration, marked duration, or
full DV tape if capturing from DV camcorder). Click Show/Hide Options Panel
to view additional settings as needed.
4. Select the capture format.
Note: If you are capturing in the DV-AVI format, you must set the Capture format to
AVI.
5. Click Burning Options to set the volume name and disc burner to use.
6. Locate the starting point of your video to capture, and click Start capture. Click
Pause capture to pause the capturing process. Click Stop capture to end the
capturing process.
BD DiscRecorder USER GUIDE 17
Advertisement
Table of Contents
