Troubleshooting - Gigabyte M1305 Series User Manual

8.1 Troubleshooting

Warning: Under the condition that you can't handle problems,
please contact to your dealer to get professional assistance
and service.
AC Adapter
Trouble Solution
Make sure the AC adapter is well connected to
the power source and Notebook.
No power supplied
48
Check the cable and plug to make sure they
to Notebook
are OK. If they are broken, please contact your
local dealer ASAP.
Battery packr
Trouble Solution
The remaining power in battery pack may be
No power supplied
not enough to power on the machine. Connect
to Notebook
AC Adapter to recharge it.
Check temperature of battery pack's surface.
Battery pack can't be recharged if its
tempera¬ture is too high or too low. Recharge it
only
after its temperature is the same with the
Can't be recharged nor¬mal environment one.
after connecting
If battery pack is fully discharged, it won't be
AC Adapter
recharged at once. Please wait for a few some
minutes.
If the power indicators of the battery pack are
always not lit up, its life may be over. Please
contact your dealer to buy another one.
Battery life depends on usage conditions of
the Notebook. You can change the set¬tings in
the Power Manager of the OS to save power.
Battery pack can't exert its full capacity if it
Battery life is
works when not fully recharged frequently.
not as long as it
Power Notebook by battery pack until its power
should be
drops to a critically low level and the machine
emits a high-pitched beep or displays a
warning message; after that, recharge bat¬tery
packs to make battery pack work longer.
WARNING: Please pay attention to the following information
regarding the battery pack:
1. Be sure to recycle the waste batteries property.
2. Do not place the batteries near high-temperature locations,
fire source or in burning fire as this may cause the batteries
to explode
3. Do not assemble/disassemble /modify the batteries without
authorization.
4. Use the battery pack provided by the original manufacturer
only. Batteries other than those supplied by the original
manufacturer may damage the device.
Keyboard
Trouble Solution
Press character keys
but number displayed Check if Num Lock is activated.
instead of character
Make sure there is no software to configure
Confusing display
the keyboard.