Initial Start-Up; Registering Your Lifebook Notebook; Installing Click Me - Fujitsu A1220 - LifeBook - Core 2 Duo 2.2 GHz Getting Started Manual

Initial Start Up
Wall Jack
Connecting
LAN Device
Wireless LAN
on/off Switch
Display Panel
Latch Button
DC In
AC Adapter
AC Cable
Power/Suspend/
Resume Button
(For
Additional
Utilities)
"Click me!"
1. open the Display Panel
• Ensure that your LifeBook is on a hard level surface and that
the air vents are not blocked.
• Lift the display, being careful not to touch the screen.
• Adjust the display until it is at a comfortable viewing angle.
2. Connect AC Power
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your notebook.
• Connect the power cord to an electrical outlet.
3. Connect to Internet or Network
• Connect an Ethernet cable to the LAN jack on your notebook and
to a wall jack or connect to a wireless Ethernet router by sliding
the wireless LAN switch to on.
Important:
• During the setup procedure, do not disconnect the power supply,
press any buttons, or use any peripheral devices such as a
mouse, keyboard, or remote control.
• You should not attach any external devices and do not put a DVD/CD in
your drive until you have gone through the initial power on sequence.
4. Booting the System
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
• Press the Power Suspend/Resume/button (above the keyboard) to
turn on the notebook. When you do this for the first time, it will display
a Fujitsu logo on the screen. If you do nothing the system will load
the operating system, and then the Windows Welcome will begin.
5. Register
• Accept the Microsoft
Fujitsu End User License Agreement to proceed.
• Select your User ID and Password during the "Welcome Screen."
• Keep a record of your User ID and password stored in a secure place.
• THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES.
• Do not attempt to turn power on or off during this stage.

6. Registering Your LifeBook notebook

• Register your notebook with Fujitsu Service and Support via our
website at us.fujitsu.com/computers.
• You will need to be set up with an Internet Service Provider (ISP)
to register online.

7. Installing Click me!

• Check to be sure the WLAN switch is on.
In addition to an icon on the desktop, a dialog box will automatically
open that prompts you to run Click Me!. If you choose not run
ClickMe! at this time, the ClickMe! icon will remain on your desktop.
• When you click the Click Me! icon, your system will automatically
build the icon tray in the bottom right of the screen. These icons
provide links to utilities that you will frequently access.
• For the latest drivers, please go to http://www.fujitsu.com/us/
support/ and follow the links to the downloads.
(For
Latest
• If the FDU Icon is missing from Windows
Drivers)
area, please download and install FDU package from the
support website. This application will keep your notebook
up to date with the latest released drivers.
(FDU)
Windows Licensing Agreement and the
® ®
taskbar notification
®
3