Advertisement
Checking Batteries
Checking Batteries
On the keypad, press B.
• If the red LED flashes, change the
batteries within 2 months.
• If no LED lights, change the
batteries immediately.
Changing Batteries
Changing batteries will not erase your
Passcode.
1. Open the safe door and find the
battery compartment on the back.
2. Model 2025 - Push on small tab
(Fig. 9) and pull the cover off.
3. Models 2072/2073 - Slide the cover
off the battery compartment (Fig. 10).
4. Properly replace batteries and put
cover back into place.
English
Appropriate Use of
Your Safe
• Your Anti-Theft safe™ is designed to
provide protection against theft and
minimal fire damage. It does not
protect the contents from serious fire
or water damage.
• For information on safes that provide
protection from fire and water
damage, see your Home Security
retailer or visit our website at
www.HoneywellSafes.com
Troubleshooting
• Safe will not open with your
Passcode:
Open the safe using the Emergency
Override Key and re-program your
Passcode. See Opening Your Safe and
Programming Your Personal Passcode.
Troubleshooting Cont.
• No LED Lights:
Model 2025 - Open the safe by
removing the Emergency Override
Lock cover (Fig. 5) and inserting the
Emergency Override Key, and change
batteries. See Checking/Changing
Batteries.
Models 2072/2073 - Open the safe
by inserting the Emergency Override
Key into the key lock (Fig.7), open safe
and change batteries. See Checking/
Changing Batteries.
If you continue to experience
problems or have questions
regarding your safe, please contact
SISCO Customer Service at
800-223-8566. Do not return safe to
the retailer unless instructed to do so
by Customer Service Representative.
Thank you!
4
Advertisement
