Advertisement
Checking Batteries
Checking Batteries
On the keypad, press B.
• If the red LED flashes, change the
batteries within 2 months.
• If no LED lights, change the
batteries immediately.
Changing Batteries
Changing batteries will not erase your
combination.
1. Open the safe door and find the
battery compartment on the back
(Fig. 7).
2. Slide the cover off the battery
compartment.
3. Replace the batteries carefully. Most
safes use 4-AA batteries.
English
Appropriate Use of
Your Safe
• Your Anti-Theft safe is designed to
provide protection against theft and
minimal fire damage. It does not
protect the contents from serious fire
or water damage.
• For information on safes that provide
protection from fire and water
damage, see your Home Security
retailer or visit our website at
www.honeywellsafes.com
Troubleshooting
• Safe will not open with your
personal code:
Open the safe using the override
key and re-program your code.
• If the Red light comes on:
Close handle and re-enter 159A
• No LED Lights:
Open the safe by removing the
override lock cover and opening
safe with override key. Refer to
Checking/Changing Batteries.
If you continue to experience
problems or have questions
regarding your safe, please contact
Sisco customer service at 800-223-8566.
Do not return safe to the retailer
unless instructed to do so by
Customer Service Representative.
Thank you!
4
Advertisement
