i.LINK Connectors
The system board has two i.LINK (IEEE1394) connectors: a 4-pin connector is
accessible from the front panel, and a 6-pin connector is accessible from the rear
panel.
Use the front-panel connector to connect to devices that use a 4-pin i.LINK
(IEEE1394) connector. Use the rear-panel connector to connect to devices that
*
use a 6-pin
i.LINK (IEEE1394) connector.
i.LINK
(rear panel)
* A 6-pin i.LINK connector can supply power from the computer to the device if the device also has a
6-pin i.LINK connector. A 4-pin i.LINK connector cannot supply power to a device.
O
1 2
N
System Board
i.LINK
(front panel)
59