Switching Between Capture Mode And Playback Mode; Capture Mode; Capture Mode Lcd Monitor Information; Using The Self-Timer - BenQ DC X600 User Manual

BenQ DC 5530 User's Manual

3.3.1 Switching between Capture mode and Playback mode

•
To change from Capture mode to Playback mode, press the
•
To change from Playback mode to Capture mode, press the
press the shutter release button halfway.
3.4

Capture mode

In Capture Mode, you may select the desired Shooting mode from the Capture mode palette.
For details, refer to "Capture mode palette" on page 6.

3.4.1 Capture mode LCD monitor information

You can display shooting information on the LCD monitor when taking pictures. The display
mode can be changed by pressing the OK/Display button.
Normal Display
Shooting information is displayed when the power is turned on.
(1) Capture mode
(2) Flash mode
(3) Drive mode
(4) Focus mode
(5) Focus frame
(6) Zoom
(7) Card/Built-in memory
(8) Battery indicator
(9) Remaining number of recordable images
(10) Date and time
(11) World Time setting
(12) Anti-shake warning
(13) Aperture
(14) Shutter speed

3.4.2 Using the self-timer

In self-timer mode, the picture is taken ten seconds or
two seconds after the shutter release button is pressed.
1. Press the four-way controller ( ) in Capture mode.
2. Press the four-way controller (
.
3. Press the OK button.
The camera is ready to take pictures using the Self-
timer.
4. Press the shutter release button halfway.
1 2 3 4
1/160 1/160 1/160
F2.6 F2.6 F2.6
14 13
) to select or
Using the DC X600
Playback button.
Playback button or
5 6 7 8 9
36 36 36
09/24/2005 09/24/2005 09/24/2005
12:00 12:00 12:00
12 11 10
Drive Mode Drive Mode Drive Mode
Self-timer Self-timer Self-timer
OK OK OK OK
9