Advertisement
Clock
"Are you observing daylight savings
View date
time at this moment? If so, fi rst see
• To view the year, press
"Select daylight saving" section below.
for about 5 seconds or press
return to clock mode.
Set clock manually
• To view month and day, press
1. Press and hold MODE until the year
. Wait for about 5 seconds or
fl ashes on the display.
press
to return to clock mode.
2. Press
/
to set the value. The
value increases or decreases quickly
when you press and hold the
button.
3. Press MODE to confi rm. Repeat step
2 to set month, day, 12H/24H, hour
and minute.
4. To save and exit the date and time
setting mode, press MODE.
Select daylight saving
This convenient feature provides a
simple way to change your clock when
daylight savings time starts or ends.
1. Press and hold
to toggle
between daylight saving on and off.
2. A
shows on the display when
you turn on the daylight saving
time.
Wake function
Select the wake source
Set wake time
. Wait
You may wake to the radio or buzzer.
1. Press and hold AL. TIME until the
to
1. Set a wake time (refer to the above
hour of alarm 1 fl ashes and
lights on the display.
instructions).
2. Press AL. 1
2. Press
/
to set the value. The
value increases or decreases quickly
select wake by radio ( ) or wake by
buzzer ( ).
when you press and hold the
button.
Disable the wake function
3. Press AL. TIME to confi rm and
• Press AL. 1
move to minute.
no corresponding wake icon ( 1,
2,
1,
4. Press
/
to set the value. The
value increases or decreases quickly
Stop the Alarm Sounding
when you press and hold the
button.
To silence the wake function
momentarily:
5. Press AL. TIME to confi rm. Press
• Press SNOOZE/SLEEP. The wake
/
to select weekday settings
icon ( 1,
as follows:
and the alarm will sound again
when the snooze period (9 minutes)
1-1: Once per week
is over. Snooze function can be used
1-5: Monday to Friday
repeatedly up to 30 minutes. After
1-7: Whole week
this, the wake function will turn off
6-7: Saturday and Sunday
until the next day.
6. Press AL. TIME to confi rm. Hour of
To stop the wake function:
alarm 2 will fl ash and
will
• Press
light on the display. Repeat step 2
AL. 2
to 5 to set alarm 2.
again the following day or the
next week, depends on the alarm
weekday settings.
To view alarm 1 time or alarm
2 time, press AL. TIME.
Sleep function
To set the sleep time:
1. When listening to radio, press
SNOOZE/SLEEP repeatedly to cycle
among the sleep time available
(90min, 60min, 30min and 15min).
When you fi rst set the sleep time,
or AL. 2
to
the sleep time is default to 90 min.
2. When the desired sleep time is
selected, release SLEEP and wait for
about 5 seconds, the sleep time is
or AL. 2
until
now set. The icon SLP lights on the
display.
2) shows on the display.
To change sleep time:
• Press SLEEP repeatedly to select
another sleep time.
To cancel the sleep mode:
• Press
to cancel the sleep mode.
2,
1 or
2) will fl ash
, AL. 1
or
. The alarm will be on
Radio
Line in
Listening to the radio
To select line in mode:
1. Connect your auxiliary source (e.g.
To turn on or off radio:
mp3 player) to the LINE IN jack at
• Press
to turn on/off the radio.
the back of the unit with an audio
Radio frequency and radio band
cable (not supplied).
icon will be shown for a while and
then the clock time will be shown.
2. If necessary, press
To select radio band (AM/FM):
unit. Adjust the auxiliary player
to mid-range volume and adjust
• Press BAND to select radio band.
The selected radio band icon lights
the master volume on the unit.
Do not turn the volume of the
on the display.
auxiliary player too high as this may
To tune frequency:
affect the sound quality. For other
playback operations, control them
• Use the tuning knob to tune the
on your auxiliary player.
frequency. The selected frequency
shows on the display.
FM Antenna
To listen to the radio, remove
This unit is equipped with an FM
the audio cable from the LINE
antenna at the back. Uncoil the antenna
IN jack.
to its full length for best reception. Tape
the end of the antenna onto the wall if
possible to improve reception.
AM antenna
A built-in ferrite rod antenna eliminates
the need for an outside antenna for
AM reception. Rotating the unit slightly
may improve reception of distant AM
stations.
Clock projector
A time projector is located on the
left side of the unit. Clock time can
be projected onto ceilings or walls
in a darkened environment for easy
reference. The distance between the
projector and the projected surface
to turn on the
should be within 3 to 9 feet.
Rotate the FOCUS to adjust the focus of
the projected image.
Press PROJECTION ON/OFF to turn on
or off the projector.
To rotate the projected image, press
180
O
FLIP repeatedly.
Advertisement
