Microphone Mixing; Timer - Panasonic SAAK960 - CD STEREO SYSTEM Operating Instructions Manual

Cd stereo system
Table of Contents

Advertisement

Microphone mixing

The buttons described for "Microphone mixing" are mainly for
the main unit unless indicated otherwise.
Enjoying the microphone mixing
Enjoying the microphone mixing
You can enjoy microphone mixing from various music sources (cas-
sette, disc, radio or other external equipments).
1
Firstly, lower the volume with [MIC VOL, MIN], connect the
microphone.
Plug type : Ø 3.5 mm (1/8˝) monaural
2
Start playing the music source.
3
Adjust the volume with [VOLUME − ] or [VOLUME + ] and
[MIC VOL, MIN] or [MIC VOL, MAX] and sing along.
Note:
• If a strange noise (howling) is emitted during use, move the
microphone away from the speakers, or turn down the microphone
volume.
• When you are not using the microphone, disconnect it from the
microphone jack, and turn down the microphone volume level to
"MIN".
• Sound adjustments can be made using microphone mixing but
recording will not be affected.
Record microphone mixing
Record microphone mixing
1
Press [0, OPEN] and insert the cassette to be recorded.
Insert with the side to be recorded facing towards you and the
exposed tape facing down.
2
Lower the volume with [MIC VOL, MIN], then connect the
microphone.
3
Select the music source:
When singing
Insert the desired disc (
along with
discs
When singing
Select your desired station (
along with
radio
When singing
Connect and prepare the external equipment
\
along from
(
page 15).
other external
equipments
4
Press [¶, REC] and start microphone mixing.
To record your voice
To record your voice
1
Press [0, OPEN] for DECK 2 and insert the cassette to be
recorded.
2
Lower the volume with [MIC VOL, MIN], then connect the
microphone.
3
Press [¶, REC] to start recording.
4
Speak through the microphone and adjust the volume with
[VOLUME − ] or [VOLUME + ] and [MIC VOL, MIN] or
[MIC VOL, MAX].
RQTX0169-P.indd 13
RQTX0169-P.indd 13

Timer

This is a 12-hour clock.
1
Press and hold [– CLOCK / TIMER] to select "CLOCK".
Each time you press and hold the button:
2
(
Within 8 seconds or so
Press [4,
3
Press and hold [– CLOCK / TIMER] to finish setting the time.
Displaying the clock
Press and hold [– CLOCK / TIMER] once when the unit is on or in
standby mode.
The time is displayed for a few seconds.
Note:
Reset the clock regularly to maintain accuracy.
You can set the timer to come on at a certain time to wake you up
(play timer) or to record from the radio or the external equipment
(record timer).
Play timer and record timer cannot be used together.
Turn the unit on and set the clock.
Timer
Play timer
Record
timer
\
page 8).
1
Press and hold [– CLOCK/TIMER] to select the timer function.
\
page 12).
Every time you press and hold the button:
˚PLAY : to set the play timer
˚REC : to set the record timer
(Proceed to the next step
2
Press [4,
3
Press and hold [– CLOCK / TIMER] to confirm.
4
Repeat steps 2 to 3 to set the fi nishing time.
Setting the clock
Setting the clock
˚ PLAY
˚ REC
CLOCK
Original display
)
/ REW] or [¢,
/ FF] to set the time.
Using the play or record timer
Using the play or record timer
Action
Prepare the music source you want to listen to;
cassette, disc number (1 ~ 5), radio or other external
equipments, and set the volume.
Check the cassette's erasure prevention tabs
\
(
page 11), insert the cassette and tune to the
\
radio station (
page 12) or select the external
\
equipment (
page 15).
˚ PLAY
˚ REC
CLOCK
Original display
within 8 seconds
/ REW ] or [¢,
/ FF] to set the starting time.
Start time
Play timer indicator
Record timer indicator
Finish time
(Continued on next page)
)
13
RQT8043
7/18/08 9:25:00 AM
7/18/08 9:25:00 AM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-ak960

Table of Contents