Electronic Digital Clock; Clock Setting Procedure - Dodge 2004 Ram 2500 Owner's Manual

NOTE: When the ignition switch is turned to OFF, the
Fuel Gage, Voltmeter, Oil Pressure and Engine Coolant
Temperature gages may not show accurate readings.
When the engine is not running, turn the ignition switch
to ON to obtain accurate readings.

ELECTRONIC DIGITAL CLOCK

The clock and radio each use the display panel built into
the radio. A digital readout shows the time in hours and
minutes whenever the ignition switch is in the "ON" or
"ACC" position.
When the ignition switch is in the "OFF" position, or
when the radio frequency is being displayed, time keep-
ing is accurately maintained.
UNDERSTANDING YOUR INSTRUMENT PANEL 151

Clock Setting Procedure

1. Turn the ignition switch to the "ON" or "ACC"
position. Using the point of a ballpoint pen or similar
object, press either the "H" (Hour) or "M" (Minute)
buttons on the radio. The display will show the time.
2. Press the "H" button to set hours or the "M" button to
set minutes. The time setting will increase each time you
press a button.
4