Armed stage
Park the vehicle and stop the engine. Arm the system as
described below.
Arm the system and leave.
1. Remove the key from the ignition switch.
2. Make sure the trunk lid is locked.
3. Lock the driver's and the passenger's door by using
the key, power door lock switch, or the remote keyless
transmitter (if equipped).
F30A0010
After completion of the steps above, the theft-alarm
indicator (located in the instrument cluster) will illumi-
nate for approximately 20 seconds and then go out,
indicating that the system is armed.
LOCKING AND UNLOCKING 49
F30A0210
2