YURAKU YUR.VISION YV216WB2 Operation Instructions Manual

YURAKU YUR.VISION YV216WB2 Operation Instructions Manual

High-resolution multi-scan color monitor
Hide thumbs Also See for YUR.VISION YV216WB2:

Advertisement

Quick Links

Operation Instructions
Thank you for purchasing this monitor, a high-resolution multi-scan color
monitor.
Please read this guide thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This monitor has been tested and found compliant with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide proper protection against harmful interference to a
residential installation. This monitor generates, uses, and can radiate radio
frequency energy. Harmful interference to radio communication may be led
as a result if it's not properly installed and used. However, there is no
guarantee that interference will not occur in a particular installation. If this
monitor does cause serious interference to radio or television reception,
resetting the monitor may determine it. Moreover, users are encouraged to
correct interference by doing one or more of the following:
Reorient or relocate the receiving antenna.
Move the monitor and the receiver further away from each other.
Connect the monitor into an outlet on a circuit different from that to
which the receiver is connected.
Consult your local dealer or an qualified technician
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded
power supply cord and the provided shielded video interface cable with
bonded ferrite cores. Also, any unauthorized changes or modifications to
this monitor would void the user's authority to operate this device.
Note: If necessary, shielded interface cables and AC power cord must be
used to meet the emission level limits.
According to WEEE regulation , this monitor can't be handled as
normal trash in Europe when it is out of usage. Please refer to the
recycle information from our website to handle it.
.

Advertisement

Table of Contents
loading

Summary of Contents for YURAKU YUR.VISION YV216WB2

  • Page 1 Operation Instructions Thank you for purchasing this monitor, a high-resolution multi-scan color monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 2: Table Of Contents

    Content Safety Precautions................1 First Setup ..................2 Quick Installation................2 Front View of the Product ..............3 Rear View of the Product ..............3 Using On Screen Display (OSD) Functions ........4 Supporting Timing Modes ..............7 Technical Information.................8 Care and Maintenance...............9 Troubleshooting .................9...
  • Page 3: Safety Precautions

    Safety Precautions This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy.
  • Page 4: First Setup

    First Setup Congratulation for purchasing this monitor of high performance! This monitor comes with the following accessories : Power Cable D-Sub Cable (15 pin) Audio Cable Warranty Card User’s Manual Quick Installation 1. Connect video cable (D-Sub cable) Make sure both monitor and computer are powered OFF. Connect the video cable ( D-Sub cable) to the computer, then to the monitor.
  • Page 5: Front View Of The Product

    Front View of the Product ➊ ➋ ➌ ➍ ➎ ➏ ➊ ➍ OSD TURN ON/OFF CONFIRM SELECTION ➋ ➎ SCROLL DOWN/DECREASE POWER ON/OFF ➌ ➏ SCROLL UP/INCREASE LED INDICATER Rear View of the Product ➐ ➑ ➒ ➐ ➒ POWER INPUT VGA INPUT (D-SUB 15 PIN) ➑...
  • Page 6: Using On Screen Display (Osd) Functions

    Using On Screen Display (OSD) Functions Display main menu. Exit from OSD menu. Auto adjust the image when at root menu. Confirm the selection. Select the desired item when in OSD menu. When not in OSD menu, it is to immediately activate Contrast/ Brightness.
  • Page 7 Short Cuts Function from the button(s) Auto Image Adjust : To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Contrast : To adjust the foreground white level of screen image. : increase contrast, : decrease contrast.
  • Page 8 Sharpness : To adjust the clarity of a non-WSXGA (1680x1050 @ 60Hz) signal with button. Setup Menu : To set up Language Select, Resolution Notice, OSD Position, OSD Time Out, and OSD Background off. Language Select : To allow users to choose from available languages. Resolution Notice : Resolution Notice is to remind you set the best quality for the image.
  • Page 9: Supporting Timing Modes

    Supporting Timing Modes 720 x 400 @ 70Hz 640 x 480 @ 60Hz 640 x 480 @ 67Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz 832 x 624 @ 75Hz...
  • Page 10: Technical Information

    Technical Information Technical Specification LCD Panel 21.6” TFT Power Management Energy Star compliant VESA DPMS compatible < 2 W Displayable Resolution WSXGA 1680 x 1050 max. Vertical Frequency 60Hz max. Pixel Dimension 0.277 x 0.277 mm LCD Display Color 16.7M Tilt 0°~20°...
  • Page 11: Care And Maintenance

    Care and Maintenance Care Avoid exposing your monitor directly to sunlight or other heat source. Place your monitor away from the sun to reduce glare. Put your monitor in a well ventilated area. Do not place any heavy things on top of your monitor. Make certain your monitor is installed in a clean and moisture-free area.

Table of Contents