Connecting A Tv And Playback Components; Connecting Using Hdmi - Pioneer VSX-522-K Operating Instructions Manual

2
2

Connecting a TV and playback components

Connecting using HDMI

If you have an HDMI or DVI (with HDCP) equipped component
(Blu-ray Disc player, etc.), you can connect it to this receiver
using a commercially available HDMI cable.
• The following connection/setting is required to listen to the
sound of the TV over this receiver.
- If the TV does not support the HDMI Audio Return
Channel function, connect the receiver and TV with audio
cables (as shown).
If the TV supports the HDMI Audio Return Channel
-
function, the sound of the TV is input to the receiver via
the HDMI terminal, so there is no need to connect an
audio cable. In this case, set ARC at HDMI Setup to ON
(see The HDMI Setup menu on page
Important
• If the receiver is connected to a TV using an HDMI cable,
the on-screen display (OSD) will not be displayed. Be sure
to use a standard RCA analog video cable to connect. In
this case, switch the TV input to analog to see the OSD
screen (for setup, etc.) on the TV.
• When the ARC function is ON and the receiver is
connected to a compatible TV with an HDMI cable, and you
switch the input of the TV to composite, the input of the
receiver may automatically switch to TV. If this happens,
switch the receiver's input back to the original input, or turn
OFF the ARC function (see The HDMI Setup menu on
page 33).
Note
• In order to listen to the audio from the TV that is connected
to this receiver using an analog audio cables, set-up for
analog audio input is required (see The Input Assign menu
on page 32).
HDMI/DVI-compatible components
DVD player,
HDD/DVD recorder
HDMI OUT
33).
This connection is
necessary in order to
see the OSD of the
unit on the TV.
Game console
Set-top box
HDMI OUT
HDMI
OUT
ASSIGNABLE
HDMI OUT
IN IN
DVD IN
DVD SAT/CBL GAME BD
OPTICAL COAXIAL
PRE OUT
SAT/CBL IN
BD IN
SUB WOOFER
GAME IN
SURR BACK/
L FRONT HEIGHT
( Single )
ANTENNA
PRE OUT
MONITOR
R
OUT
L
IN
MONITOR SAT/CBL DVD
R
OUT IN IN
FM UNBAL
( CD )
DVD SAT/CBL ANALOG IN 1
75
ASSIGNABLE
VIDEO AUDIO
ANALOG
IN1 (CD)
HDMI IN
VIDEO IN
HDMI/DVI-compatible TV
14
Connecting your equipment
Blu-ray Disc player,
Blu-ray Disc recorder
HDMI OUT
If the TV does not support
the HDMI Audio Return
OPTICAL
Channel function, this
IN1 (TV)
connection is required to
listen to the TV sound over
the receiver.
IN 1 IN 1
ASSIGNABLE
( TV ) ( SAT/CBL )
FRONT
R L
CENTER SURROUND
AM LOOP
R L
CAUTION: ATTENTIO
SPEAKERS A SPEAKER IMPEDANCE ENCEINTE D'IMP
Class 2 Wiring
6 -16 . 6 -16 .
R L
ANALOG AUDIO OUT DIGITAL AUDIO OUT
Select one
OPTICAL