Step 2:
Choose "Press the button of the new device in two minutes" and click Connect.
Step 3:
For the configuration of the wireless adapter, please choose "Push the button on my
access point" in the configuration utility of the QSS as below, and click Next.
Step 4: Wait for a while until the next screen appears. Click Finish to complete the QSS
configuration.
TL-WR740N/TL-WR741ND
Figure 4-4 Add A New Device
The QSS Configuration Screen of Wireless Adapter
150Mbps Wireless N Router
- 21
-
Need help?
Do you have a question about the TL-WR740N - 150Mbps Wireless Lite N Router IEEE 802.11n 802.11g 802.11b Built-in and is the answer not in the manual?
Questions and answers