TP-Link TL-WR740N - 150Mbps Wireless Lite N Router IEEE 802.11n 802.11g 802.11b Built-in User Manual page 18

150mbps wireless n router
Hide thumbs Also See for TL-WR740N - 150Mbps Wireless Lite N Router IEEE 802.11n 802.11g 802.11b Built-in:
Table of Contents

Advertisement

Router.
3.
Click Next, and then WAN Connection Type page will appear, shown in Figure 3-6.
The Router provides Auto-Detect function and supports three popular ways PPPoE,
Dynamic IP and Static IP to connect to the Internet. It's recommended that you make use of
the Auto-Detect function. If you are sure of what kind of connection type your ISP provides,
you can select the very type and click Next to go on configuring.
4.
If you select Auto-Detect, the Router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the WAN port before detection. The
appropriate configuration page will be displayed when an active Internet service is
successfully detected by the Router.
1) If the connection type detected is PPPoE, the next screen will appear as shown in Figure
3-7.
TL-WR740N/TL-WR741ND
Figure 3-5 Quick Setup
Figure 3-6 WAN Connection Type
- 11
-
150Mbps Wireless N Router

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tl-wr741nd

Table of Contents