Installing The Css 11503; Installing A Css 11503 As A Freestanding Unit - Cisco CSS5 SSL K9 - Syst. CSS11500 SSL MODULE Hardware Installation Manual

Installing the CSS 11503

Installing the CSS 11503
Warning
Note

Installing a CSS 11503 as a Freestanding Unit

Note
Cisco 11500 Series Content Services Switch Hardware Installation Guide
1-14
The CSS 11503 can be a freestanding unit or installed in a 19-inch equipment
rack, as described in the following sections.
Do not remove the CSS 11503 cover. There are electrical shock hazards present
in the unit if the cover is removed. The fans and power supply in a CSS 11503 are
not user-serviceable or installable components.
Removing the CSS 11503 cover voids its warranty.
This section covers:
Installing a CSS 11503 as a Freestanding Unit
•
Installing a CSS 11503 as a Rackmounted Unit
•
To install a freestanding CSS 11503:
Position the CSS 11503 on the selected flat surface.
1.
2. Attach the rubber feet, provided in the accessory kit, to each bottom corner
of the CSS.
All cables connect to the front of the unit with the exception of the power cord.
Chapter 1 Unpacking and Installing the CSS
78-16421-01