Configure With Windows Xp Wireless Zero Configuration - TP-Link TL-WN7200ND User Manual

TL-WN7200N
3. The Profile configuration screen will appear, please enter Test for the Profile Name, TPLINK
for the SSID, select Infrastructure for the Network Mode, select WEP for the Data Encryption
and enter 0123456789 for Network key.
4. Click OK to save this profile.
5. Highlight the profile named Test on the profile list and click Activate on the Profile screen.
The utility will establish a connection with this AP by configured profile.

3.2 Configure with Windows XP Wireless Zero Configuration

1. Right click the icon
Double click the Use Zero Configuration as Configuration utility option to enable Wireless
Zero Configuration function.
Figure 3-13 Use Zero Configuration as Configuration utility
2. After that, double click the icon
available wireless network choices. You can highlight a network and then click Connect to
add to a network.
Note:
If you have not installed SP2 for Windows XP, the screen above will not be available.
3. During the connection, you will see the screen as Figure 3-15 shown.
150Mbps High Power Wireless USB Adapter User Guide
on the bottom of the desktop first and you will see Figure 3-13.
, and the following Figure 3-14 will appear with some
Figure 3-14 Choose a wireless network
- 19 -