Chapter 2. Installation Guide; Hardware Installation; Software Installation; For Windows Xp&2000 - TP-Link TL-WN322G User Manual

Wireless g usb adapter

Hide thumbs Also See for TL-WN322G:

Table of Contents

Chapter 2. Installation Guide

There are two ways to install the Adapter:

1. Plug the Adapter directly to the USB port on your computer.

2. Connect the Adapter and your computer through the USB cable attached in package.

The promoted Found New Hardware Wizard screen will pop up when the adapter is installed

correctly.

When the hardware is installed correctly, the system will prompt "Found New Hardware Wizard",

click Cancel and take the following instructions to install the driver.

2.2.1 For Windows XP&2000

The Setup steps for Windows 2000 and XP are similar with each other. This user guide takes

Windows XP for example.

Insert the Resource CD into your CD-ROM drive, and the screen as shown below will

display. To continue, select TL-WN322G. There will be a menu including Install Driver &

Utility and User Guide.

Click Install Driver & Utility to load the following screen.

TL-WN322G

Figure 2-1

Wireless G USB Adapter

Table of Contents