Selective Update Of The Firmware Components - Cisco AIR-LAP1252AG-A-K9 - Aironet 1252AG - Wireless Access Point Software Configuration Manual

Chapter 6 Managing Firmware and Configurations
Updating Firmware
The access point only updates the radio firmware if the radio firmware version to
Note
be loaded is newer than the firmware in the radio.

Selective Update of the Firmware Components

To update firmware components individually, click From File Server on the
Selectively Update Firmware line on the Cisco Services Setup page. The Update
Firmware From File Server page appears. Figure 6-6 shows the Update Firmware
From File Server page.
Figure 6-6 Update Firmware From File Server Page
To update one of the three firmware components from the file server, follow the
steps listed in the "Full Update of the Firmware Components" section on
page 6-5, but in Step 3, type the filenames of the firmware components you want
to update in the components' entry fields. Click Browser Update Now to load and
install the new firmware. When the update is complete, the access point
automatically reboots.
Cisco Aironet 1200 Series Access Point Software Configuration Guide
6-7
OL-2159-03