TP-Link TL-WA830RE User Manual page 29

Step 2: Choose "Enter the new device's PIN" and enter the PIN code （take 16952898 for
example） of the wireless adapter in the field after PIN as shown in the figure above. Then
click Connect.
Note:
The PIN code of the adapter is always displayed on the QSS configuration screen as shown in the
following figure.
Step 3: For the configuration of the wireless adapter, please choose "Enter a PIN into my
access point or a registrar" in the configuration utility of the QSS as below, and click
Next.
Figure 4-7 The QSS Configuration Screen of Wireless Adapter
Note:
In this example, the default PIN code of this adapter is 16952898 as the above figure shown.
Method Three: Enter the PIN from my AP
Step 1: Get the Current PIN code of the AP in Figure 4-2 (each AP has its unique PIN code. Here
takes the PIN code 96980088 of this AP for example).
TL-WA830RE 300Mbps Wireless N Range Extender User Guide
Figure 4-6
21