Care And Maintenance - Dixon ZTR 5020 Operator's Manual

CARE AND MAINTENANCE

CUTTER BLADE MAINTENANCE:
NOTE: Observe proper blade position prior to removal.
1. Safely raise front of mower.
2. Hold or block blade from turning.
3. Loosen blade nut and remove blade.
4. Tighten blade nut securely. Refer to diagram.
NOTE: Be sure blade is centered on pilot before tightening bolt to 60 ft. Ibs. torque.
Wear heavy, thick gloves when holding onto cutter blade,
avoid the sharp edge of the blade.
Page 25