Table of Contents
Advertisement
Digital HD STB User Guide
B
A
S
I
C
S
B
A
S
I
C
S
After connecting power to the STB, if the time is displayed on the Front Panel
Time/Channel display screen, the booting is completed.
Rebooting procedure
1.
By pressing the three [INFO], [VOL-], [VOL+] buttons simultaneously,
STB will be rebooted.
2.
When the time is displayed on the Time/Channel display screen,
then the booting is completed.
HD Resolution setting procedure
When the TV connected to the STB does not support automatic resolution setting,
the STB resolution must be set manually by using the STB Front Panel button.
The basic resolution of the STB is 1080I.
1.
In the Standby mode, press
[Active/Standby] button once.
2.
The current resolution is displayed while
blinking in the Time/Channel display screen.
Then, press the [INFO] button.
3.
is displayed, and the resolution can be changed selected by
pressing the following buttons.
♦
[VOL+]: 1080I
♦
[CH+]: 480I
4.
When the resolution is selected, save by pressing the EXIT button.
is displayed in the Time/Channel display screen.
24
© SAMSUNG Electronics Co., Ltd.
E
T
T
I
N
G
E
T
T
I
N
G
[VOL-]: 720P
[CH-]: 480P
Advertisement
Table of Contents
