ViewSonic EP4602 User Manual page 27

Click Config button to pop up the Config interface as shown below.
In this interface, set server IP, automatically refresh interval, enter the registered user name and
password, and set timeout lock. Click OK to complete the configuration, or click Cancel not to
configure.
2.3.4. Login
After completing configuration, click the Login button to access your server.
The dialog box shown below will pop up after you click "Login".
You can directly click the Login button here to use the username and password specified in
configuration to log in your server, or click the Reset button and enter new user name and password to
log in. Click the Cancel button not to log in.
22