ViewSonic EP4602 User Manual page 23

Configure system parameters checkbox :
①. Check: Write terminal parameters to U disk when creating card.
②. Uncheck: Not write
3. System Parameters Setting: Set the parameters of the terminal without using the remote
control.
OSD Language: English and Chinese ("中文")
Clock Display: Off, Upper Right, Upper Left, Lower Right, Lower Left,
Scroll Text Display: On or Off.
Parameter Settings: Brightness, Contrast, Saturation. (50 by default; Selectable Range: 0----100)
Timer mode: Common Mode, Week Mode.
4. Schedule: Operations about ePoster Manager Express schedule/ time period:
1) Schedule checkbox unchecked: Automatically play media files in the order they are added
2) Schedule checkbox checked: Valid to all time periods when Date ----/--/--, Time--:-- unchecked.
3) Add schedule period: No overlapping is allowed in date period and time period. A red exclamation
mark will appear when error occurs.
4) When corresponding date or time period is available, play the corresponding media. When not,
play the media in blank time period;
5) Double-click schedule item to edit schedule;
6) Save schedule: Save the set schedules. Load schedule: Open previously set schedules.
5. Media：
1) For blank date time period, at least one media should be added. When no media playback is
available for corresponding date or time period, media in blank time period will automatically play
in a continuous loop;
2) Add media: Corresponding schedule must be chosen before you add media. The added media will
be played during corresponding schedule time period;
3) Delete media: Delete selected media. Multiple media files can be deleted from media box in Create
Card interface. You can select multiple files by pressing Ctrl or using Shift+ Up / Down buttons;
4) Up/Down: Adjust media playback order in schedule period;
5) 30 schedules at most. Each schedule can have 10 media at most added. No more than 30 media can
be imported.
18