Important safety instructions IMPORTANT SAFETY INSTRUCTIONS PLEASE READ AND SAVE FOR FUTURE REFERENCE Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use. • Read these instructions.
Important battery information Warning: Your product contains a battery and charging system which is designed to work in temperatures that do not exceed 50°C (122°F). Leaving this product in a closed automobile or the trunk of an automobile where temperatures may exceed 50°C may result in permanent battery damage, fire, or explosion.
Carmel, IN 46032 1-317-810-4880 ( No technical /product support is available via this number. This phone number is for regulatory matters only.) Visit www.rcaaudiovideo.com for technical support EZ2120 EZ2120BL EZ2120BK EZ2120PL EZ2120RD EZ2120SL This Class B digital apparatus complies with Canadian ICES-003.
Contents Important safety instructions IMPORTANT SAFETY INSTRUCTIONS ....................1 Important battery information ......................2 Ecology ..............................2 Precautions for the unit ........................2 FCC Information .................. 3 Contents ....................4 End user license agreement End user license agreement ......................6 Getting started 1.
Page 6
Recording videos to VHS tape or DVD ..................25 Managing videos on your computer Computer system requirements ...................... 26 Connecting to a PC ..........................26 About RCA Memory Manager ......................27 Viewing videos on PC .......................... 27 Additional information Tips and troubleshooting ........................28 Visiting RCA website ..........................
Program, provided the copy contains all of the original Program's proprietary notices. (b) You may transfer the Program and license to another party only as a part of the RCA branded Portable Digital Audio/Video Device (“A/V Device”), and only if the other party agrees to accept the terms and conditions of this EULA.
Page 8
2. LICENSE RESTRICTIONS (a) Except for the licenses expressly granted to you in this EULA, no other licenses or rights are granted or implied. (b) You may not (i) make the Program available over a network where it could be used by multiple computers at the same time;...
Page 9
6. LIMITATION OF LIABILITY (a) TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL AUDIOVOX, OR ITS DEALERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, CORRUPTION OF FILES, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) REGARDLESS OF CAUSE OR FORM OF ACTION, INCLUDING CONTRACT, TORT, OR NEGLIGENCE, ARISING OUT OF YOUR USE OF OR INABILITY TO USE THE PROGRAM, EVEN IF AUDIOVOX HAS BEEN...
Page 10
(if any) related to the RCA Memory Manager Software and to verify compliance with the terms of this License. Audiovox may use this information, as long as it is in a form that does not personally...
Page 11
2. ARCSOFT CORPORATION EULA ARCSOFT CORPORATION END USER LICENSE AGREEMENT IMPORTANT: READ CAREFULLY BEFORE DOWNLOADING OR INSTALLING THIS SOFTWARE! The following is a legal software license agreement between you, the software end user, and ArcSoft, Inc. Carefully read this license agreement before using the relevant ArcSoft software ("Software"). Installing the Software on a computer or other hardware device indicates that you have read this license agreement and agree to its Terms.
Page 12
EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. 6. Limited Liability. YOUR SOLE REMEDY AND THE ENTIRE LIABILITY OF ARCSOFT AND ITS LICENSORS ARE SET FORTH ABOVE.
Getting started Dear RCA customer, Thank you for purchasing the RCA Small Wonder Camcorder. This product will let you record videos with high definition quality. You can also manage your recordings on your computer with the RCA Memory Manager included with this product.
3. Inserting (or removing) SD memory card An SD memory card is recommended for recording (memory card supplied). If you use a microSD card, insert the card in the micro-SD card adapter before inserting it into the camcorder's card slot. Lift up the cover Push the card in until a click is heard •...
5. Resetting the camcorder • To reset the camcorder (if it is not functioning properly), press and hold the On/Off switch for more than 10 seconds. 6. Setting date and time • It is recommended to set the date and time before using the camcorder. Refer to Menu settings section for more information.
General controls General controls On/off switch Microphone Recording indicator AV output Lens USB and HDMI video output (Lift up the cover to access the connector) Camcorder strap hole Tripod screw hole LCD screen SD card slot (Lift up the Delete cover to show Play/pause recordings...
Operation modes There are three basic modes for operating the camcorder: Video preview mode, Photo preview mode and Playback mode. It will always launch in video preview mode after being switched on. Refer to the diagram below for switching between modes and read relevant sections in the user manual for detailed operations. Switch on Press MODE...
Recording videos Recording quality 1. In Video preview mode, press MODE to show the camcorder menu. 2. Press - or + to highlight Quality within the Video Menu 3. Press RECORD to select Quality which will then expose the choices of HD, HQ and WebQ. 4.
Recording videos 1. In Video preview mode, press the red RECORD button to begin recording. Video recording indicator Elapsed time • While recording, the red recording light on the camcorder front will turn on. 2. Press to pause a recording. •...
Taking photos To take photos 1. In Photo preview mode, press RECORD to take photos. • The photo resolution is 3 megapixels which is interpolated from a 1 megapixel sensor. 2. After taking a photo, please allow a few seconds for image processing before the next photo can be taken.
Playback mode Playing back recordings 1. Press to enter Playback mode and start playback of the most recent recording (video/photo). Playback indicator Current file number/Total number of files Elapsed playback time 2. Press + or – during playback to adjust volume (video only). 3.
Page 22
5. To select another video, press to cue the previous or next video. Type of file (Video/Photo) Duration of current file 6. When video playback stops, press MODE or RECORD to return to Video preview mode. (Press RECORD to stop video playback)
Deleting To delete one recording 1. Press in Playback mode to select file. 2. Press DELETE. 3. Press + or - to select One. 4. Press the red RECORD button to confirm delete. To delete all recordings 1. Press DELETE in Playback mode and press + or - to select All. 2.
Menu settings Using the camcorder menu 1. Press MODE to show the camcorder menu on the screen. 2. Press + or – to highlight a menu option. 3. Press to enter the highlighted menu option. 4. Press + or – to change the setting. 5.
Connecting to external devices Viewing videos on TV 1. Plug in the AV cable (provided) – Insert the single connector end into the camcorder (AV jack) and connect the double connector ends to the corresponding video (yellow) and audio (white) input jacks on the TV.
Recording videos to VHS tape or DVD 1. Plug in the AV cable (provided) – Insert the single connector end into the camcorder and connect the double connector ends to corresponding video (yellow) and audio (white) inputs of the recording device (VHS or DVD recorder).
RCAMacInstallers volume to start the installation. After the Memory Manager 3 installation has completed, double-click the RCA Detective Installer file in the RCAMacInstallers volume to install the RCA Detective application, which will automatically run the Memory Manager 3 application when your camcorder is connected to the Mac.
Save videos to your computer • Edit videos by simply drag-and-drop For more detailed instructions on using RCA Memory Manager, please refer to the help section in the software. Viewing videos on PC To ensure that videos can be managed and played on your PC: •...
Additional information Tips and troubleshooting Cannot turn on the camcorder. • Make sure the battery is not empty. Refer to the user manual to properly charge the camcorder before use. SD memory card cannot be detected by camcorder. • Make sure the SD memory card is inserted properly. Remove and insert the card from the card slot again when the camcorder is powered off.
Warranty information 12 Month Limited Warranty Applies to RCA Camcorders AUDIOVOX ACCESSORIES CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company’s option) without charge for parts and repair labor.
Page 33
• Properly pack your unit. Include any remotes, memory cards, cables, etc. which were originally provided with the product. However DO NOT return any removable batteries, even if batteries were included with the original purchase. We recommend using the original carton and packing materials. Ship to Audiovox Electronics Corp.
Page 34
Illustrations contained within this publication are for representation only and subject to change. The descriptions and characteristics given in this document are given as a general indication and not as a guarantee. In order to provide the highest quality product possible, we reserve the right to make any improvement or modification without prior notice.