DSC PC 2500 Instruction Manual page 13

FCC Compliance
CAUTION: Changes or modifications not expressly approved by Digital Security
Controls Ltd. could void your authority to use this equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Re-orient the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
The user may find the following booklet prepared by the FCC useful: "How to Identify
and Resolve Radio/Television Interference Problems". This booklet is available from
the U.S. Government Printing Office, Washington D.C. 20402, Stock # 004-000-
00345-4
Important Information
This equipment complies with Part 68 of the FCC Rules. On the side of this equipment
is a label that contains, among other information, the FCC registration number of this
equipment.
Notification to Telephone Company
Upon request, the customer shall notify the telephone company of the particular line
to which the connection will be made, and provide the FCC registration number and
the ringer equivalence of the protective circuit.
FCC Registration Number: FCC Registration Number: FCC Registration Number: F534J3-10411-AL-E
FCC Registration Number: FCC Registration Number:
Ringer Equivalence Number: Ringer Equivalence Number: Ringer Equivalence Number: 0.0B
Ringer Equivalence Number: Ringer Equivalence Number:
Telephone Connection Requirements
Except for the telephone company provided ringers, all connections to the telephone
network shall be made through standard plugs and telephone company provided
jacks, or equivalent, in such a manner as to allow for easy, immediate disconnection
of the terminal equipment. Standard jacks shall be so arranged that, if the plug
connected thereto is withdrawn, no interference to the operation of the equipment at
the customer's premises which remains connected to the telephone network shall
occur by reason of such withdrawal. Ensure that plugs and jacks meet the dimension,
tolerance and metallic plating requirements of 47 C.F.R. Part 68 Subpart F.
USOC Jack: RJ-31X USOC Jack: USOC Jack:
USOC Jack: USOC Jack:
12