Save Scanned Image To - File Name; Save Scanned Image To - Save As Type; Save Scanned Image To - Folder - Canon D1250U2F - CanoScan USB Flatbed Scanner User Manual

Chapter 2
Using the Toolbox

Save scanned image to - File name

Input a root name for the scanned image.
f
Note
• This category is not available in the Copy settings dialog.
• The first scanned image is saved with the root name.
From the second, the file is saved under the same root
name, successive four-digit numbers are added to the
root.
• The file name extension, such as [.bmp], is automatically
added.

Save scanned image to - Save as type

Select the file format for the saved image file.
f
Note
• This category is not available in the Copy and Mail
settings dialogs.
j
• See the "File Formats" topic in the Appendices for
more information about file formats.

Save scanned image to - Folder

The scanned images are saved to the folder appearing
here. To change the folder, click the [Browse] button,
select a folder and click the [OK] button.
w w
Contents Index
17
Settings Common to the Dialogs (5/6)
e
Important
• If you are using ScanGear Toolbox with Windows XP, the
"Unable to open file" error message may display and
you may be unable to scan. Click [OK] on the error
message, return to the currently selected ScanGear
Toolbox settings dialog, and click the [Browse] button in
the "Save scanned image to" category. Set the save
location to the folder bearing the user name with which
you log onto Windows XP.
f
Note
• This category is not available in the Copy settings dialog.
Previous View Next View Previous Page Next Page