Canon CanoScan D1230UF User Manual page 34

chapter 4
What is on the
Screen?
Top Page
Glossary
Contents
Index
• Grayscale (14 bit) and Color (42 bit) is selectable
with the CanoScan D1230U and Grayscale (16 bit)
and Color (48 bit) with the CanoScan D2400U.
Note
• The Text Enhanced and Grayscale selections require
more time that the Black and White setting in
order execution digitization of the scanned images.
• Selecting the Color Mode setting automatically
resets the Advanced Mode Tone tab settings.
• Selecting Black and White or Text Enhanced sets
the Resolution setting to 300 dpi. If you select any
setting other than Black and White or Text
Enhanced, the Resolution setting is re-set
automatically to the base setting for the Image
Type selection. However, if either Black and White
or Text Enhanced is selected when ScanGear CS-U
is started and then another Image Type selected,
then the Resolution setting remains set for 300 dpi.
• When you select "Film" as the Image Source, the
options for "Image Type" are the following four;
Color Screen, Color Printer, B&W Screen, B&W
Printer.
Also in this case, the options for "Color Mode" are
following two; Graysclae, Color.
34