Advertisement
Quick Links
Advertisement
Related Manuals for Bontrager TUBULAR WHEEL - SETUP
Summary of Contents for Bontrager TUBULAR WHEEL - SETUP
- Page 1 Tubular Wheel Setup ENGLISH...
-
Page 2: Tubular Wheel Setup
Tubular Wheel Setup Preparing the Tubular Rim This is a multi-day procedure. On the fi rst day, you stretch the tire without glue. On following If you are gluing a tire onto a rim that was previously prepared, scrape off as much old/loose days, you apply layers of glue that must completely dry (usually each layer dries for a full day) glue as possible and continue on as if it was a new rim (Figure 20). - Page 3 Applying the First Layer of Glue Attaching the Tubular Tire to the Rim Follow the glue manufacturer’s installation instructions for using their glue, especially Tighten the removeable valve core before gluing the tubular on the rim. When riding, the valve suggested drying times.
-
Page 4: Completing The Tubular Installation
Completing the Tubular Installation 7. Continue working down the tire, pressing it into rim until there are only a few inches of the tire remaining outside the rim bead (Figure 26). 1. Inflate tires to the manufacturer’s maximum recommended pressure. 8. - Page 5 Bontrager tires and wheels are warranted to be free of defects in materials and workmanship. For details, visit www.bontrager.com or a dealer near you. www.bontrager.com...