Page 2
801 W. Madison Street Waterloo, Wisconsin 53594 This wheelset, like all track wheels, is designed to be used in a bike frame with 120mm OLD (Over Locknut Dimension) rear spacing as a 1-speed wheel. Track wheels with tubular rims are designed to be used with properly attached tubular-type tires.
Page 3
Installation of parts Lockring threads Incorrect installation of parts may damage the wheelset. To install a track cog Only install a track cog on the side of the hub with lockring threads (Figure 2). If necessary, remove the thread cover and install the cover on the other side of the hub.
Page 4
This warranty applies only to the original owner and is not transferable. Claims under this warranty must be made through an authorized Bontrager dealer. Proof of purchase is required.