Download Print this page

KUSSMAUL 091-35 Instruction Manual

Battery saver power supply / automatic load switch

FILE: 091-35 BATTERY SAVER.P65

4-23-2002

REV. A

INSTRUCTION MANUAL

BATTERY SAVER

POWER SUPPLY / AUTOMATIC LOAD SWITCH

MODEL #091-35

NOTE :

This Battery Saver is designed

for negative ground vehicles.

INPUT :120 volt, 50/60 Hz, 1amps

OUTPUT: 12VDC, 7 AMPERES D.C.

3 YEAR WARRANTY

KUSSMAUL ELECTRONICS CO., INC

170 CHERRY AVE., WEST SAYVILLE, N.Y. 11796

TEL: in NY 631-567-0314

TOLL FREE: 800-346-0857

FAX: 631-567-5826

Table of Contents

Need help?

Do you have a question about the 091-35 and is the answer not in the manual?

Page 1 FILE: 091-35 BATTERY SAVER.P65 4-23-2002 REV. A INSTRUCTION MANUAL BATTERY SAVER POWER SUPPLY / AUTOMATIC LOAD SWITCH MODEL #091-35 NOTE : This Battery Saver is designed for negative ground vehicles. INPUT :120 volt, 50/60 Hz, 1amps OUTPUT: 12VDC, 7 AMPERES D.C.
Page 2 INTRODUCTION The BATTERY SAVER is a power supply with transfer relay. Loads connected to the BATTERY SAVER are energized from the vehicle’s battery when the A.C. battery is OFF. As soon as A.C. power is applied, the power supply provides 12 volts D.C. and the relay transfers the loads to the power supply.
Page 3 RADIOS HAND LIGHTS ACCESSORIES BATTERY SAVER +12V TO ACCESSORIES 120 VAC INPUT BATTERY BLUE BLACK 2 AMPERE TO CHASSIS FAST ACTING FUSE GROUND WIRING INSTALLATION BATTERY SAVER #091-35 12VDC / 7AMP OUTLINE DRAWING...
Page 5 Kussmaul Electronics Company, Inc. shall have no liability for dam- ages of any kind to associated equipment arising from the installation and /or use of the Kussmaul Electronics Company, Inc. products. The pur- chaser, by the acceptance of the equipment, assumes all liability for any damages which may result from its installation, use or misuse, by the purchaser, his or its employees others.