Table of Contents
Advertisement
DIRECTV Set-top box information for the installer
5.10 DisableUserEntry (0x94)
Command Label
Command Byte
Input Parameter(s)
Return Data Stream
Return Response
Return Value
Description
5.11 GetReturnValue (0x95)
Command Label
Command Byte
Input Parameter(s)
Return Data Stream
Return Response
Return Value
Description
5.12 Reboot (0x96)
Command Label
Command Byte
Input Parameter(s)
Return Data Stream
Return Response
Return Value
Description
2
Since a hard-reset is performed, no return value or return response can be provided.
DIRECTV Proprietary
Version 1.1.a
DisableUserEntry
0x94
None
None
ACK_FCNOK
: Always Success
0x0000
: Always Success
The STB executes a DisableUserEntry command by blocking remote control and front
panel key presses from reaching the user interface handler. Instead user commands
(front panel entries and IR remote control entries) may be obtained using the
GetUserCommand service command.
GetReturnValue
0x95
None
[RVal3][RVal2][RVal1][RVal0]
ACK_FCNOK
: Always Success
None
: Preserves the previous return value
The STB will execute a GetReturnValue command by returning the Return Value
from the last issued Command that generated a return value.
Reboot
0x96
None
None
2
None
None
The STB will execute a Reboot command by performing a hard reset of the STB.
This command has the same effect as pressing the red reset button on the STB.
Page 24 of 49
November 17, 2005
DTV-MD-0058
Advertisement
Table of Contents
