Button Functions
1.
2.
3.
4.
5.
6.
7.
8.
9.
Note: The REC button must be pressed TWICE to
record from your VCR. For some brands of VCRs, you
might need to press the REC button once, then press it
again for three seconds.
Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. E.G. PREV.CHAN may be called RECALL, or
ENTER may be called DISPLAY. These differences
depend on the brand and model of your product. Also,
this remote can only operate features that exist on your
product. E.G., your product must have PREV.CHAN
ability for the PREV.CHAN button to operate this
feature.
MRU3500-OM_H14102.pmd
20.
19.
18.
17.
16.
15.
14.
13.
12.
11.
10.
4
4-5
Button Functions, cont.
1. Red Indicator Lights when any button is pressed.
2. TV, VCR, DVD, CBL, SAT Selects product to be
operated.
3. CC (SUBTITLE) TV Closed Caption (if your TV has
this feature) or DVD Subtitle toggle.
4. CHANNEL UP/DOWN Changes the channels.
5. NUMBERS Enter numbers for direct channel
selection. Some products require Enter to be
pressed after channel selection.
6. ENTER Used after direct channel number entry to
immediately change to the selected channel.
7. INFO/SELECT Displays/selects on-screen channel
information, etc.
8. MENU Access the Menu functions of the device
you are controlling.
9. RECORD, PLAY, STOP, REW, FF, PAUSE VCR
control buttons operate your VCR even when the
remote is set to operate the TV. Also operates DVD
Scan -/+.
10. UP, DOWN, LEFT & RIGHT navigation buttons.
11. QUIT Used to exit menu functions.
12. OK Selects menu items for the device you are
controlling.
13. GUIDE Displays on-screen program guide.
14. TV/VCR/INPUT For some TVs, press repeatedly to
select from available viewing sources (antenna,
cable box, VCR, etc.).
15. CHAPTER +/- controls DVD/CD track selection i.e.
DVD/CD Track Skip Up/Down (in DVD and SAT
modes). Note the VCR buttons also control DVD
when in DVD Mode.
16. MUTE Turns off the TV sound while the picture
remains.
17. VOLUME UP/DOWN Changes the volume level of
the product, normally the TV.
18. PREV. CHAN Returns to the previously selected
channel, or DVD repeat toggle.
19. SETUP Used for setup.
20. POWER Turns product On or Off.
9/6/2006, 4:07 PM
5
Need help?
Do you have a question about the MRU3500 - Universal Remote Control and is the answer not in the manual?
Questions and answers