Reassembling The Freezer Door - Samsung RF220NCTASR/AA User Manual

8. Insert and tighten the ground screw into the left
and right upper hinges with a philips
screwdriver(+).
ground wire
9.
Connect the electronic wire on the top of the
refrigerator.

Reassembling the freezer door

1.
Pull out the rails to the full length on each sidle
of the cabinet evenly.
2. Hang the freezer door front onto open slot on
the sides.
Slot
14_ setting up
3. With the 10mm wrench, reattach 4 bolts to
connect the rail with the door.
4.
With the drawer pulled out fully, insert the
drawer box into the rail system.
Be careful not to scratch or dent the sliding
CAUTION
Make sure that you mount the freezer
basket in the right position when removing
CAUTION
/ installing the freezer door. Failing to do
so may result in the door not opening or
closing properly.