Table of Contents
Advertisement
THE DIGITAL SATELLITE RECEIVER'S MENU SYSTEM
TurboTune™
The TURBOTUNE SETUP screen is used to specify which nine channels that will appear in the
The TURBOTUNE setup screen
on the remote control or the digital satellite receiver's front panel.
Installation
The INSTALLATION screen provides the utilities that makes the setup and testing of your system
The INSTALLATION screen
Once the process has begun, your old access card will no longer allow viewing. You should not
interrupt the process once it has begun. An interruption could cause both the old and the new card to
become invalid. When the process is complete, your new access card will be usable, while the old card
will no longer be valid.
Satellite
This button only applies for oval dishes that are equipped with LNBs that receive signals from 101 ,
119 and possibly 110 . Each time this button is selected, the satellite being monitored for signal
strength will advance.
Transponder #
You may want to try different transponders to troubleshoot satellite signal reception problems. Each
transponder transmits multiple programs at a time. The transponder shown when the screen first
displays represents the one associated with the last viewed program. By moving the highlight to the
transponder area, you can enter a number from 01 to 32. Different transponders may show varying
signal strengths. This is normal unless the variations are extreme (such as 40 and 90). In the event of
signal reception problems, customer service representatives may ask for signal strength on a different
transponder. Do not change transponders trying to find the best signal since the transponder will
automatically change depending on the channel you want to view.
TurboTune pop-up panel that shows over video when
pressed.
Things to do in the TURBOTUNE
SETUP screen
Set Channel
Using the , , , and
keys, highlight one of the nine channel
boxes. You can enter the desired channel using the number keys on
the remote control, or by using the
highlighting one of the channel boxes will also initiate a pop-up
panel that will allow you to set the channel using the
simple and convenient.
Places to go from the INSTALLATION
screen
System Test
The System Test button takes you to the SYSTEM TEST screen.
New Card
The NEW CARD screen provides a way DIRECTV to distribute
new access cards. Should you be issued a new card, you will need to
activate it. Follow the on-screen instructions carefully to initialize it.
is
and
. Pressing
while
and
keys
P
7-13
AGE
Advertisement
Table of Contents
