Turbotune; Set Channel - Hughes HIRD-D01 Owner's Manual

Directv digital satellitereceiver owner's manual hird-d01, hird-d11

Table of Contents

THE DIGITAL SATELLITE RECEIVER'S MENU SYSTEM

In the CHANNEL LISTS screen, use the , , , and

to the channel number and list that you wish to change. Press the

check mark, which indicates that the channel in that row is included in the list shown at the top of the

column.

To help you decide whether to include or exclude a certain channel, the title of the currently airing

program for that channel will appear at the top of the screen.

Remember that when the digital satellite receiver is locked, only channels in the Family list can

be viewed. This means that even though a channel appears on the Fav. A, B, C, or All Channels list,

the selected channel must also be on the Family list in order to see or hear it.

For the Family List limit to be in force, the digital satellite receiver must be locked. Locking is

described earlier in this chapter. When the system is locked the passcode will be needed to modify the

settings of the channel lists.

TurboTune™

The TURBOTUNE SETUP screen is used to specify which nine channels that will appear in the

The TURBOTUNE setup screen

Things to do in the TURBOTUNE SETUP screen

Using the , , , and

channel using the number keys on the remote control, or by using the

while highlighting one of the channel boxes will also initiate a pop-up panel that will allow you to set

the channel using the

TurboTune pop-up panel that shows over video when

pressed.

keys, highlight one of the nine channel boxes. You can enter the desired

and

keys on the remote control or the digital satellite receiver's front panel.

keys to highlight the button that corresponds

key to add or remove the

and

. Pressing

7-13

AGE

Table of Contents

Hird-d11