Prepare The Image Drum - OKIDATA OKIPAGE 20 User Manual

Prepare the Image Drum

1. Press the OPEN button.
2. Lift the cover (the cover must be lifted completely to remove the image
drum cartridge).
Caution!Be careful not to touch the image drum's shiny green sur-
face!
3. Lift out the image drum and remove the protective paper.
4. Remove the tape and shipping insert from the image drum and discard
them.
5. Reinstall the image drum in the printer, placing the alignment pins on
each side of the drum into the slots in the printer.
Pin
Slot
Chapter 1: Setting Up E–3