Advertisement
EDITING PARAMETERS
This is where you will be able to edit and customize the various adjustable parameters of
Profile 4 in the Novak programmable ESCs
Brake will overwrite the One-Touch programming in all 4 ESC throttle profiles)
connect the ESC to the Millennium Pro to work in the Edit Profile mode.
Any parameters modified in this section are making changes to the Pit Wizard software's
active throttle profile.
You must save the active profile to one of the Pit Wizard's memory locations
(0-9), or they will be lost when you turn off the Millennium Pro or exit the Pit Wizard software screens.
DISPLAY
E N T E R
Press down ( ) or up ( ) arrows to
scroll to Pit Wizard option screen.
S t a r t
Press ENTER to go to Pit Wizard sub menu.
E N T E R
Then press down ( ) or up ( ) arrows
P i t Wi z a r d
to scroll to Edit Profile screen.
Press ENTER to go to Edit Profile sub menu.
2
E d i t P r o f i l e
Then press down ( ) or up ( ) arrows
to scroll to parameter to edit.
2 1 N e u t r a l
Press ENTER to edit Neutral** point.
**Not usually changed (One-Touch setting).
Press down ( ) or up ( ) arrows
2 1 N e u t r a l
to change the parameter value.
1394 S
Then press ENTER to store new value.
2 2 F u l l T h r o t t l e
Press ENTER to edit Full Throttle** position.
**Not usually changed (One-Touch setting).
Press down ( ) or up ( ) arrows
2 2 F u l l T h r o t t l e
to change the parameter value.
510 S
Then press ENTER to store new value.
2 3 F u l l B r a k e
Press ENTER to edit Full Brake** position.
**Not usually changed (One-Touch setting).
Press down ( ) or up ( ) arrows
2 3 F u l l B r a k e
to change the parameter value.
351 S
Then press ENTER to store new value.
2 4 D e a d b a n d
Press ENTER to edit Deadband percentage.
Press down ( ) or up ( ) arrows
2 4 D e a d b a n d
to change the parameter value.
4 %
Then press ENTER to store new value.
2 5 D r i v e F r e q
Press ENTER to edit Drive PWM Frequency.
Press down ( ) or up ( ) arrows
S e l e c t F r e q
to change the parameter value.
5.86 KHz
Then press ENTER to store new value.
2 6 M i n i m u m D r v
Press ENTER to edit Minimum Drive.
Press down ( ) or up ( ) arrows
2 6 M i n i m u m D r v
to change the parameter value.
5 %
Then press ENTER to store new value.
2 7 B r a k e F r e q
Press ENTER to edit Brake PWM Frequency.
Press down ( ) or up ( ) arrows
S e l e c t F r e q
to change the parameter value.
3.90 KHz
Then press ENTER to store new value.
2 8 D r a g B r k F r q
Press ENTER to edit Drag Brake Frequency.
Press down ( ) or up ( ) arrows
S e l e c t F r e q
to change the parameter value.
3.90 KHz
Then press ENTER to store new value.
2 9 D r a g B r k Va l
Press ENTER to edit Drag Brake Value.
Press down ( ) or up ( ) arrows
2 9 D r a g B r k Va l
to change the parameter value.
0 %
Then press ENTER to store new value.
2 A To g g l e O p t .
Press ENTER to edit Toggle Options.
Press down ( ) or up ( ) arrows
to turn toggle ON (1) or OFF (0).
To g g l e S e l e c t
Press ENTER for each toggle position,
0 0 0 0 0 0 0 0
until returning to Toggle Options screen .
(Press BACK to go back to previous position)
TOGGLE POSITION 1 (Drag Brake Toggle)
When ON (1), BRAKE pot on speed control adjusts Drag Brake Value.
(Currently this is the only toggle that controls a feature in the ESC)
TOGGLE POSITION 2 (Throttle Channel Position)
This toggle indicates your transmitter's throttle channel position: Normal (0) or Reversed (1).
(If your transmitter throttle channel is reversed, you will also see a number sign "#"
displayed to the left of the value on the Full Throttle & Full Brake sub-screens)
2 E d i t P r o f i l e
(Note: Any changes to Neutral, Full Throttle, & Full
. You do not need to
BUTTON
or
ENTER
then:
or
ENTER
then:
or
ENTER
or
then:
ENTER
ENTER
or
then:
ENTER
ENTER
or
then:
ENTER
ENTER
or
then:
ENTER
ENTER
or
then:
ENTER
ENTER
or
then:
ENTER
ENTER
or
then:
ENTER
ENTER
or
then:
ENTER
ENTER
or
then:
ENTER
ENTER
or
then:
ENTER
DOWNLOAD PROFILE
With the MP D•LINK2 harness connecting C2/TC2 to the Millennium Pro, and a charged
battery pack connected to the C2/TC2, follow the steps below to download the Pit Wizard
software's active throttle profile to the speed control's Profile 4 memory position. Note
that Profile 4 will be the active profile in the speed control after downloading.
IMPORTANT: Did you upload your One-Touch settings? If you did not first upload
a throttle profile from the ESC, and use it as the starting point for the profile you are
about to download, your ESC will not be properly adjusted to your transmitter.
DISPLAY
E N T E R
Press down ( ) or up ( ) arrows to
scroll to Pit Wizard option screen.
S t a r t
Press ENTER to go to Pit Wizard sub menu.
E N T E R
Then press down ( ) or up ( ) arrows
P i t Wi z a r d
to scroll to Download Data screen.
3 Download Data
Press ENTER to download Pit Wizard's
active profile to ESC Profile 4 location.
3 Download Data
Press down ( ) or up ( ) arrows to
scroll to next Pit Wizard sub menu screen.
DONE
***
***
RECALL STORED PROFILE
Follow the steps below to recall any of the stored throttle profiles from the Pit Wizard
software's ten storage locations (The ESC does not need to be connected to the charger).
Once recalled, the profile can be reviewed and modified in the Edit Profile mode, or
downloaded to the speed control from the Download Data mode.
DISPLAY
Press down ( ) or up ( ) arrows to
E N T E R
scroll to Pit Wizard option screen.
S t a r t
Press ENTER to go to Pit Wizard sub menu.
E N T E R
Then press down ( ) or up ( ) arrows
P i t Wi z a r d
to scroll to Read Profile screen.
4 Read Profile
Press down ( ) or up ( ) arrows
4 Read Profile
0
Press ENTER to recall stored profile.
4 Read Profile
Press down ( ) or up ( ) arrows to
scroll to next Pit Wizard sub menu screen.
Read Complete
SAVING PROFILES
The Millennium Pro's built-in Pit Wizard software has the ability to store ten custom ESC
throttle profiles. Once stored, the throttle profiles can be recalled at any time from the
Read Profile mode, modified in the Edit Profile mode, or downloaded to the speed control
with the Download Data mode.
Follow the steps below to save the Pit Wizard's active throttle profile to one of the storage
locations (The ESC does not need to be connected to the charger).
DISPLAY
E N T E R
Press down ( ) or up ( ) arrows to
scroll to Pit Wizard option screen.
S t a r t
Press ENTER to go to Pit Wizard sub menu.
E N T E R
Then press down ( ) or up ( ) arrows
P i t Wi z a r d
to scroll to Save Profile screen.
5 S a v e P r o f i l e
Press down ( ) or up ( ) arrows
5 S a v e P r o f i l e
0
Press ENTER to save active profile.
5 S a v e P r o f i l e
Press down ( ) or up ( ) arrows to
scroll to next Pit Wizard sub menu screen.
P r o f i l e S a v e d
W W W . T E A M N O V A K . C O M
NOVAK ELECTR9ONICS, INC.
18910 TELLER AVENUE • IRVINE • CA • 92612
3 D o w n l o a d D a t a
BUTTON
or
ENTER
then:
or
ENTER
or
4 R e a d P r o f i l e
BUTTON
or
ENTER
then:
or
Press ENTER to go to
ENTER
Read Profile sub menu.
or
to change profile number.
then:
ENTER
or
5 S a v e P r o f i l e
BUTTON
or
ENTER
then:
or
Press ENTER to go to
ENTER
Save Profile sub menu.
or
to change profile number.
then:
ENTER
or
Advertisement
