Table of Contents
Advertisement
DISPLAY TAB
The Display tab includes Brightness, TV Standard, and Display items. The
Brightness and Display are not applicable to the DMP040.
NOTE: Brightness settings selected in the settings menu will be record-
ed and kept. Brightness settings selected while watching a movie
will reset to the default selection in the settings menu when the
unit is shut off.
1. Enter Setting menu, the Display tab is the default tab (see figure above).
2. Push the Navigation button down to select Brightness, TV Standard, or
Display. Refer to the table below for the settings available.
Setting Item Method and Purpose
Brightness
TV Standard
Display
PHOTO TAB
The following photo settings, Slide Music, Slide Repeat, and Slide Interval are
found under the Photo tab.
44
Push Navigation button to right or
left to adjust display brightness
Push Navigation button to right
or left to select a video standard
Push Navigation button to right or
left to select the output device
Options
Adjust brightness to meet
the desired level.
NTSC/PAL
LCD/TV—In TV mode the
3.5" LCD screen will be
blank. When powered off
the unit will revert to the
3.5" LCD screen operation.
© 2005 Directed Electronics—all rights reserved
Advertisement
Table of Contents
