Dell PowerVault NX1950 Installation Manual page 15

Figure 2-2. Two-Node Configuration
8
1 NIC port A to Gb Ethernet
switch (optional)
2 NIC port B to Gb Ethernet
switch (optional)
3 Gb1 and Gb2 to Gigabit
Ethernet switch(es)
4 Port 1 on PowerVault NX1950
storage system 0 SAS HBA to
In-0 on controller 1
NOTE:
Setting up the cluster using Microsoft
supported only on the Microsoft Windows
Enterprise Edition operating system. If you did not purchase the Enterprise
Edition, contact your sales representative to obtain an upgrade kit.
4
5
7 6
controller 0
1
PowerVault NX1950 storage system 0
PowerVault NX1950 storage system 1
PowerVault MD3000 storage array
controller 1
5 Port 1 on PowerVault NX1950 storage
system 1 SAS HBA to In-1 on
controller 1
6 Port 0 on PowerVault NX1950 storage
system 1 SAS HBA to In-1 on
controller 0
7 Port 0 on PowerVault NX1950 storage
system 0 SAS HBA to In-0 on
controller 0
8 DRAC port to Ethernet switch for
lights-out management (optional)
®
Cluster Services (MSCS) is
®
Unified Data Storage Server 2003,
Cabling Your Solution
2
3
13