Install Film Into The Film Holder - JOBO SNAPSCAN 5000 - V1.15 User Manual

2 Install film into the film holder
2.1 Insert slides into the rapid slide feeder
Film Slot
2.2 Install the Negative Film into holder
2. Install film into negative film slot
1. Put a stack of slides into the feeder
1. Open the film holder as illustrated
-6-
After the slides are placed into the holder
and the holder is placed into the slot of
the scanner (refer to „Quick Start") the
slides can be slide into the scanner by
moving the holder backward and forward.
The slides are positioned automatically
inside the scanner.
3. Close the film holder