Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT REV 1 Manual page 87

Table 5-7 Time Series Chart Container Details (continued)
Parameter
Monthly
Additional Details
Timeline Interval
Baseline
Graph Content
Network Location
View Objects
Layers
Options
Average per second
Aggregate Selected
Objects
Graph
STRM Log Management Users Guide
Description
Choose one of the following options:
All data from previous month
•
Data from a previous month - Using the drop-down list
•
boxes, select the dates to begin and end generating the
report. Default is 1st to 31st.
Using the drop-down list box, select the time interval. Options
are based on the schedule selected. For example, a weekly
report supports intervals of one hour, one day, and one
week. A monthly report supports intervals of one day, one
week, and one month.
This option only appears if you select a base line type graph
type. Choose one of the following options:
Individual Baseline - Creates individual baselines for
•
each object on the chart.
Note: This option can create many lines on chart.
Aggregate Baseline - Creates a single baseline for the
•
the aggregate of all objects on the chart. Aggregate
Baseline is default.
Select the check box for each network you wish to chart data
for. You must select at least one network location.
Using the drop-down list box, select the events object.
Using the drop-down list box, select the layer you wish to
appear on the graph. The layer options that appear depends
on the View Objects. The layer also determines the average
per second availability.
Select the check box to graph the average of all objects that
are selected.
Select the check box to graph the sum of all (view) objects or
networks that are selected.
Select one of the following:
View Objects - Displays the top view objects selected.
•
Networks - Displays the top networks associated with the
•
view objects you have selected.
Creating a Report 81