Digital Sound; Aspect Ratio - JVC HD 56G786 - 56" Rear Projection TV User Manual

Digital Sound

You can select the optical digital sound output, either PCM or Dolby Digital when your TV is
connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can
enjoy listening in 5.1ch sound when watching digital broadcasts.
Press the M
To DIGITAL SETUP
π †
è
To enter
To Digital Sound
π †
è
To select PCM or DOLBY DIGITAL
Press the M
Notes:
• If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it
cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 23.

Aspect Ratio

You can select the aspect mode for ATSC from 4:3 or 16:9.
Press the M
To DIGITAL SETUP
π †
è
To enter
To Aspect Ratio
π †
è
To select 4:3 or 16:9
Press the M
Notes:
• Set the mode to 4:3 or 16:9 before you record a program using the ATSC MONITOR OUT.
• Make sure the mode you choose is the same as the TV's aspect ratio when the recorded
program is played back, so that you can obtain a good picture quality, free from any unatural
distortions.
button
ENU
button when finished
ENU
Manufactured under license from Dolby Laboratories. "Dolby", and the
double-D symbol are trademarks of Dolby Laboratories.
button
ENU
button when finished
ENU
Digital Setup
79