GB
Safety Instructions
You may only spray coating materials such as paints, varnishes, glazes, etc. with a
●
flashpoint of 21°C (32°C in UK) and higher without additional warning.
(German classification of coating material is hazard classes A II and A III, see
material tin.)
The device may not be used in workplaces covered by the explosion-protection
●
regulations.
There must be no sources of ignition such as, for example, open fires, smoke of lit
●
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.
Do not spray any substances whose hazard potential is not known.
●
Before working on the spray gun remove the power plug from the socket.
●
Do not use the spray guns to spray flammable substances.
●
The spray guns may not be used with flammable solvents.
●
Caution against dangers that can arise from the sprayed substance and observe
●
the text and information on the containers or the specifications given by the
substance manufacturer.
Recommendation: Wear a breathing mask and safety glasses when spraying.
CAUTION - DANGER OF INJURY!
Never point the spray gun at yourself, at other people or at animals.
When working with the W 550 indoors as well as outdoors ensure that no solvent
●
vapors are sucked in by the spray gun.
When working outdoors, be aware of the wind direction. Wind can carry the coating
●
substance across greater distances - thus causing damage. When working indoors,
provide for adequate ventilation.
Do not let children handle the device.
●
Never open the device yourself in order to carry out repairs in the electrical system!
●
With original WAGNER accessories and spare parts, you have the guarantee that
all safety regulations are fulfilled.
Coating Materials Suitable for Use
Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes,
automotive finishes, staining sealers and wood sealer-preservatives.
Coating Materials Not Suitable for Use
Wall paints (emulsion paints) etc., alkali and acidic paints.
14
W 550