Troubleshooting; Blank Screen; Display Problems; Technical Specifications - BELINEA 2225 S1W Manual

TROUBLESHOOTING

Blank Screen

Power indicator is off
- Make sure the power cable is connected properly (see section "Connecting").
- Make sure that the monitor was turned on using the power switch (see section "Startup").
Power indicator lights orange
- Perhaps a power saving mode is active? Press any key on your keyboard or move the mouse.
Power indicator lights green
- A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard
or move the mouse.
"No Signal Detected!" message
- Is the signal cable connected to the monitor and the PC's graphics port (see section "Connecting")?
- Is the PC turned on (see your PC's documentation)?

Display Problems

Image is displaced to the left/right or to the top/bottom
- If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see
chapter "Basic Setup", section "Automatic Image Adjustment", or chapter "OSD Menu Functions", section "Auto
Adjust".
Image flickers or is shaky
- Perhaps setup file chosen for the monitor is incorrect. For information on monitor setup under Windows
NT/xP consult the "Configuration" section.
Image is blurred
- Check brightness and contrast settings (see chapter "OSD Menu Functions", section "Luminance").
- Check the sharpness setting (see "Sharpness" function in the "OSD Menu Functions" section).
Color problems
- If the colors are off (e.g., white is not really displayed as white etc.), you should adjust the color temperature (see
"Color" function in section "OSD Menu Functions").

TECHNICAL SPECIFICATIONS

LCD panel
Contrast ratio
Viewing angle
Response time
Brightness
Input signal
Display colors
Synchronization
Video band width
Ergonomic resolution
Audio
Power connection
Power consumption
Dimensions/weight
Operating environment
22 inch diagonal size (Wide; 55.9 cm visible), low radiation according to TCO '03,
certified to ISO 13406-2, pixel fault class II, TN+Film panel technology
1000:1 (typical) / 1100:1 (max.)
(Contrast ratio ≥ 10:1) horizontal 170°, vertical 160° (typical)
(Contrast ratio ≥ 5:1) horizontal 170°, vertical 170° (typical)
5 ms (typical)
300 cd/m (typical) / 320 cd/m
2
Video: analog (15-pin mini D-Sub)
16.7 mill. colors
30–84 kHz horizontal, 55–77 Hz vertical
170 MHz (pixel rate)
1680 × 1050 (60 Hz)
Amplifier: 1 W at 8 Ohms
Loudspeaker: 1 W continuous load, 1.5 W peak power
100–240 V AC, 50–60 Hz
ON status: max. 60 W (with audio); color of the status LED: green
SLEEP status: < 2 W; color of the status LED: orange
Power saving functions EPA certified
Width: 517.1 mm, height: 444.1 mm, depth: 173.0 mm; 5.8 kg (net)
Operation: 5 to +35 °C, humidity: 10–90% (non-condensing)
Storage: -20 to +60 °C, humidity: 10–70% (non-condensing)
(max.)
2
-
Belinea 2225 S1W Operating Instructions - 7
ENGLISH
9x/ME/2000/
®