Table of Contents
Advertisement
CONFIGURATION
Monitor setup under Windows
and XP ..........................................................................
If using the monitor under Windows
XP, we strongly recommend installing the Belinea con-
figuration file. you can obtain this file from your Belinea
dealer or download it from the MAXDATA FTP server at
ftp.maxdata.com. Here, click the "Belinea_Treiber_
Driver" directory and download the Belinea.inf and
README_Belinea.TXT files. Follow the installation
instructions in the README_Belinea.TXT file.
BASIC SETUP
Automatic Image Adjustment .................................
you can adjust the image settings (such as image posi-
tion, phase, etc.) manually or by using the LCD monitor's
automatic image adjustment feature. This will adjust the
image parameters to their optimal settings for the cur-
rent graphics mode. Press AUTO (
the automatic adjustment. The process will take a short
while until completed.
Shortcut for adjusting contrast and brightness...
you can adjust contrast and brightness directly by press-
ing the
or
buttons (
OSD menu is not displayed. Press the
increase the contrast/brightness or
IMAGE SETTINGS USING THE OSD MENU
The OSD menu is a window on your screen that allows
you to view and change display settings. To change an
OSD setting:
1. Press the ENTER button (
OSD menu on the screen.
. There are a total of 9 OSD submenus divided by
categories. Select the desired submenu by pressing
the OSD button
or
4; see section "OSD Menu Functions").
Figure 4. Monitor features
9x/ME/000
®
9x/ME/2000 or
®
in fig. 4) to launch
and
in fig. 4) while the
button to
to decrease it.
in fig. 4) to display the
buttons (
and
in fig.
Monitor setup under Windows
Under Windows
NT 4.0 no separate setup file is
®
required. Select the vertical frequency and the number
of colors directly from within the "Settings" "Control
Panel" "Display" "Settings" menu.
Setting the volume directly.....................................
You can adjust the volume directly by pressing button
EXIT (
in fig. 4) when the OSD menu is not displayed
on screen. You can then change the volume by pressing
or
the buttons
(
and
. Press the ENTER button (
selected function or associated submenu.
. If you selected a submenu, now select the subfunc-
tion you want using the
and
in fig. 4).
. Set the desired value using the OSD button
(
and
in fig. 4).
6. Press the ENTER button (
ting. Repeat steps 2–5 to make further adjustments
as needed.
7. The OSD menu automatically disappears if no
changes are made for more than 30 seconds (default
setting). The current settings will be saved. you can
close it manually by pressing the EXIT (
button.
Belinea 2225 S1W
ENGLISH
NT .0 ..................
®
in fig. 4).
in fig. 4) to activate the
or
OSD buttons (
or
in fig. 4) to save the set-
in fig. 4)
-
Operating Instructions -
Hide quick links:
Advertisement
Table of Contents
