Laser Pegs The Ultimate Construction Toy For Kids GS030B Instructions Manual

LASER PEGS
The Ultimate Construction Toy For Kids•
Pleaseread this manual before you begin!
GS030B
Failureto follow this manual' instructions may
result in damage to the Triangle Power Base, AC
Adapter and/or Laser Pegs'. Not adhering to
SPACE
these instructions will void the manufacturer's
FIGHTER
warranty. The packaging must be kept because
AGES 5+
it contains important information.
16 Models+
Any creation you can buiH
WARNING:
LIGHTED
HOKING parts.
Not for children under 3 yrs.
Do not submerge in water.
• 20 Laser Pegs@
• 82 Construction Parts
• Triangle Power Base
• Instruction Manual
Requires 3 AA Batteries EN71, RoHS COMPLIANT
This
Batteries NOT
all safety requirements
Included
of ASTM
MODEL INSTRUCTIONS
All additional model instructions can
be downloaded at www.LaserPegs.com
Laser Pegs@ Parts List
There is No LED In The 90 Degree Peg
xl
PEG
SQUARE
SQ-JAÆ 49PEG STRAIGHT WHEELPEG STACKABLE
M-MPEG T-PEG
EachLaser Pegeis color coded on the circuit board inside
Color
each shape. There is No LED In The 90 Degree Peg.
Code
0 00 00
0 ' 000000 0
Laser Pegs'
Sound Activated
Peg Cord
Triangle Power Base
Construction Parts List
xli
x6
00000
www.LaserPegs.com
This manual iscopyright and cannot be reproduced or used online without Laser
Pegs@Ventures LLCpermission. Copyright 2014 0 All Rights ReservedUS Patent
#7,731 ,558 Additional Global & Multiple Patents Pending. Laser Pegs' Ventures
I I r 8304 Consumer Ct., Sarasota FL 34240. Contact: Support@LaserPegs.com
Connecting Pegs
To construct with LaserPegs', slidetwo piecestogether to form a
connection. Slide each piece on and off smoothly. The 900Pegs are
essential to construction but they DO NOT LIGHTUP.
men nomena
The unit may malfunction if subjected to radio-frequency interference. It SHOULDrevert to
ormal operation when the interference stops. If not, it may become necessary to turn the power
and back on, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory,
equiring the user to reset the devise by removing and reinstalling the batteries.
Red
Push Red
Power Button
Power Button
to turn on/off
Push Red Power Button to
to
cycle through 4 different
light settings.
F 963
AC Adapter
SOUND/ON/FLASWFLASH FASTER Connection
WARNING: STROBE LIGHTS
The toy is not to be connected to
MAY CAUSE SEIZURES the recomrnended number of
Batteriese'
Remove the three (3) screws.
Rernove the 3 Phillips head screws
2:
Place three (3) AA batteries in the correct
osition - asdisplayed inside the Triangle
Bower Base.
Reassemble the Triangle Pow•erBase.
3.
4. Replace the three (3) screws.
xl
Push RED Power Button to turn on!
5.
6. Do not mix old and new batteries.
7. Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium,
NiMH) batteries! 3-AA
8. Exhausted batteries are to be removed
from the Triangle Power Base.
9. Never connect more than 200 Laser Pe se
TRUSS
10. Non-rechargeable batteries are not to e
recharged.
I I . Rechargeable batteries are only to be
recharged under adult supervision.
12. Rechargeable batteries are to be removed
13. Batteries are t obe inserted with wed'
correct polarity.
14.The supply terminals are not to be short-
circuited. Remove the three Phillips head
15. DO NOT THROW BATTERIES INTO FIRE!
screws with a 4mm screw driver.
Requires (3AA) Batteries
Please dispose of batteries properly as per state and local regulations.
Using an
AC Adapter
Remove all batteries
from Laser Pegs@ power
base before using the
5-volt ACadapter.
avoid short-circuits. keep metal objects and
other unauthorized materialsfrom obstructing
the peg holes
The ACadapter and the Triangle Power Baseare to be regularly examined for
damage to the cord, plug, enclosure and other parts, and in the event of such
damage, they must not be used until the damage has been repaired.
WARNING!EachLaserPeg* draws current from the batteries. Therefore, the more
pegs you use,the quicker you will deplete your battery power! Asthe power
weakens, the current will slowly fail and some Laser Pegs@will i lluminate (typically
the reds and yellows) and some won't. When the Laser Pegs' dim the Laser Pegse
are not broken, they just need stronger batteries or an AC Adapter.
You have 3 simple options.„
I. Usea 5-volt AC Adapter —available from www.LaserPegs.com
2. Change the batteries.
3. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more laser pegs you connect!
DO NOT SUBMERGE IN WATER
GALACTIC CHICKEN—The
GALACTIC CHICKEN
Model
Difficulty
Level
Peg Holes
than
supiies
Batteries
When using an AC
Adapter, NEVER
place the adapter
plug into the Tri-
angle Power Base
top peg holes.
Never cor.nect more than 200
LaserPegs• when using a 5-volt
(2000mA)ACAdapter.
COMBINE
PARTS
creature that all other alien creatures taste
STEP
ooo
ooo
ooo
ooo
ooo
ooo
ooo
ooo
ooo
000
FLIP MODEL
ROTATE
OVER
MODEL
like.
pncr-om
zoo
ooo
ooo
ooo
ooo
ooo
ooo
ooo
ooo
ooo
ooo
000